★ StatTrak™ Falchion Knife | Doppler (Factory New) Phase 4

Skin overview

★ Falchion Knife | Doppler (Phase 4) is a curved clip point knife covered in a deep blue marbled finish with dark swirls running through it. In Factory New the candy coating stays glossy and unbroken, so the blue depth and the contrast between light and dark patches come through fully. This is the cleanest way to own this phase, with nothing interrupting the colour on the blade or the handle.

Item type: knife. Covert is the top weapon rarity: usually the most prominent items of a collection or case.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

Other qualities of this skin: Minimal Wear.

Appearance in Factory New

The blade is coated in a marbled blue finish where bright cobalt and violet-tinted patches alternate with dark, almost black swirls, and the polished cutting edge runs along it as a thin silver line. The handle carries the same blue marbling down to the curved pommel, broken only by the flat silver bolster plate with its pivot screw and the small steel pins.

In Factory New the coating is intact across the whole knife, with no visible scratches on the blade or the handle. The tip, spine and edge keep the same gloss as the flat of the blade. In game the blue reads evenly bright and the dark swirls stay crisp in the first-person view. Copies at the lower end of the range look identical to the inspect image.

Factory New quality — float range 0–0.07

The whole float range of ★ StatTrak™ Falchion Knife | Doppler Phase 4 is 0–0.08; Factory New takes the 0–0.07 segment (88% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

It drops as a rare special item from:

• Spectrum Case
• Spectrum 2 Case

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter.

What to look at before you buy

• Look at where the float sits within the wear range, since higher Minimal Wear copies show more marks on the tip.
• Check the pattern in inspect, because the balance of bright blue and dark marbling on the blade varies between copies.
• Examine the blade tip, spine and lower handle, as these are the first places where wear shows.
• Note whether the knife is StatTrak™ and whether it has a name tag.

Who should buy Factory New

• Collectors who want this phase with fully intact coating.
• Players who inspect their knife often and want no marks on the tip.
• Conclusion: the choice for those who want the blue finish at its cleanest.