★ StatTrak™ Huntsman Knife | Doppler (Factory New) Phase 3

Skin overview

★ Huntsman Knife | Doppler (Phase 3) has a candy-coated marbled finish in deep blue and violet, with a teal-green band running across the blade. Dark marbling drifts through the colour, so the blade looks like stained glass. In Factory New the coating is at its glossiest, and the blue, purple and green transitions stay crisp right up to the tanto point and the serrated spine.

Item type: knife. Covert is the top weapon rarity: usually the most prominent items of a collection or case.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

Other qualities of this skin: Minimal Wear.

How the skin looks in Factory New

The blade carries the Doppler finish from the tanto point to the guard: saturated blue and violet with a teal-green area in the middle and lower part, overlaid with smoky black marbling. The fuller line and the serrated spine pick up the same colours, and the teeth catch light as darker blue-violet edges.

In Factory New the candy coat is complete and keeps its full gloss across the blade. The tip, the edge and the spine teeth show their full colour without lighter spots. In game the blue-to-green transitions look smooth and bright when you inspect the knife and in normal play. Copies at the lower end of the grade can still have tiny marks at the tip, and those are only visible in close inspection.

Factory New wear: float 0–0.07

The whole float range of ★ StatTrak™ Huntsman Knife | Doppler Phase 3 is 0–0.08; Factory New takes the 0–0.07 segment (88% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

It drops as a rare special item from:

• Spectrum Case
• Spectrum 2 Case

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter.

What to look at before you buy

• Look at how much teal-green and how much blue the pattern shows on the blade, since copies of this phase differ noticeably.
• Check the tanto point and the spine serrations in the inspect view, because wear appears there first.
• Note where the float sits within the grade, especially for Minimal Wear copies that are close to Factory New.
• Check whether the copy is StatTrak™ and whether it carries a name tag you want to keep.

Who the Factory New quality suits

• Collectors who want the Phase 3 colours with a flawless glossy coat.
• Players who inspect their knife often and want the tip and serrations fully coloured.
• Conclusion: the choice for maximum cleanliness and a pattern with a strong teal zone.