★ StatTrak™ M9 Bayonet | Gamma Doppler (Factory New) Phase 3

Skin overview

★ M9 Bayonet | Gamma Doppler (Phase 3) is a long military knife with a blade covered in marbled blue, cyan and green, broken by darker smoky streaks under a candy coat. In Factory New the anodized layer is intact from tip to guard, so the colour shifts stay deep and glossy under any light. This is the grade for buyers who want the finish exactly as it was applied.

Item type: knife. Covert is the top weapon rarity: usually the most prominent items of a collection or case.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

The remaining qualities of this skin: Minimal Wear.

Appearance in Factory New

The blade carries the main pattern: marbled swirls of bright blue near the tip, cyan and green through the middle, and dark smoky veins running across the surface. The serrated spine and the cutout near it pick up the same colours, with lighter highlights on the ridges.

In Factory New the blade shows no visible marks, and the marbling is fully saturated from tip to guard. The tip and cutting edge, which wear first, are as clean as the rest of the blade. In game at normal distance the knife reads as a solid glossy mix of blue and green. The guard, ring and pommel keep an even teal shine.

Factory New quality — float range 0–0.07

The float of ★ StatTrak™ M9 Bayonet | Gamma Doppler Phase 3 ranges from 0 to 0.08; the Factory New quality covers 0–0.07 — 88% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

It drops as a rare special item from:

• Gamma Case
• Gamma 2 Case

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter.

What to check before buying

• Look at the float position within the range, especially on Minimal Wear copies near the upper limit.
• Inspect the blade tip and cutting edge, since marks show up there first.
• Compare the balance of blue and green on the blade, as the colour distribution differs between copies.
• Check for a name tag and whether the copy is StatTrak™.

Who should buy Factory New

• Collectors who want the anodized finish without any marks.
• Players who inspect their knife often and notice small details.
• Conclusion: the choice for a clean, untouched Phase 3.