★ StatTrak™ Navaja Knife | Tiger Tooth (Factory New)

Skin overview

★ Navaja Knife | Tiger Tooth is a small flip knife with a blade anodized in bright orange-gold and etched with darker tiger stripes, paired with a marble-enamel handle. In Factory New the anodized layer is unbroken, so the colour stays even and saturated from the tip to the bolster. This is the grade for buyers who want the finish exactly as designed.

Item type: knife. Covert is the top weapon rarity: usually the most prominent items of a collection or case.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

The remaining qualities of this skin: Minimal Wear.

Appearance in Factory New

The blade is covered in orange-gold anodizing with diagonal dark brown tiger stripes running across both the flat and the clip point, while the sharpened edge shows a thin silver bevel. The bolster and lock area carry the same orange finish and stripes, broken up by silver pivot and lock screws.

At Factory New the anodized blade has no visible breaks in colour, and the tiger stripes keep sharp edges along their full length. The tip, edge and spine, which are the first areas to wear on this finish, look as clean as the rest of the blade. In game the knife shows a uniform, glossy orange with clear stripes in every inspect angle. The marble handle and silver hardware are untouched.

Factory New wear: float 0–0.07

The whole float range of ★ StatTrak™ Navaja Knife | Tiger Tooth is 0–0.08; Factory New takes the 0–0.07 segment (88% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

It drops as a rare special item from:

• Prisma Case
• Prisma 2 Case

What it costs in each quality

Among 17 skins of the Navaja Knife in the Covert grade and this quality, this skin is the most affordable.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 38% dearer than the regular one.

What to check before buying

• Check where the float sits within the range, since lower floats keep the tip and edge completely clean.
• Inspect the blade tip and spine closely, as these are the first spots where the anodizing breaks.
• Compare stripe placement across a few copies if you care how the stripes fall on the visible side of the blade.
• Look for a name tag or StatTrak™ counter and decide whether you want them on this knife.

Who should buy Factory New

• Collectors who want the anodized finish with no marks at all.
• Players who inspect their knife often and notice small details at the tip.
• The choice for buyers who want this knife in its cleanest form.