CZ75-Auto | Polymer (Minimal Wear)

Skin overview

Polymer is built on contrast: glowing cyan molecular lines on a dark slide, a plain gunmetal frame and a few teal highlights. At Minimal Wear the difference from a clean copy usually comes down to faint marks on edges that are hard to spot in a match. It keeps almost the whole look while usually costing less than the top grade.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

How the skin looks in Minimal Wear

The slide is a dark charcoal base covered in a cyan decal of connected rings and lines that resembles a polymer formula, with brighter teal touches near the ejection port and rear. The front barrel section is black, while the frame, trigger guard and long magazine are a plain grey gunmetal finish.

Tiny scuffs may appear on the top edges of the slide and the muzzle end. The cyan pattern remains complete and the teal parts keep their colour. Frame and magazine still look clean. At normal distance it is practically indistinguishable from Factory New.

Minimal Wear wear: float 0.07–0.15

The whole float range of CZ75-Auto | Polymer is 0–0.5; Minimal Wear takes the 0.07–0.15 segment (16% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

CZ75-Auto | Polymer belongs to The Glove Collection, which holds 17 skins.

It drops from Glove Case.

What it costs in each quality

Taking Minimal Wear as the baseline:

• Factory New — 4.2× dearer
• Field-Tested — 2.1× cheaper
• Well-Worn — 2.5× cheaper
• Battle-Scarred — 2.4× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

By price this skin is 9th of 13 skins Mil-Spec Grade CZ75-Auto in this quality (the first being the dearest).

StatTrak™ and Souvenir

There is also a the StatTrak™ version: the counter on the weapon tracks kills. Right now it is 1.9× cheaper than the regular one. There is also a the Souvenir version with tournament stickers.

Which stickers suit it

Cyan, teal, black, white and silver stickers match the formula decal and the grey frame. Holo or foil stickers in blue tones work well on the dark slide, while the plain grey frame below it suits cleaner, low-contrast designs.

What to look at before you buy

• Check where the float sits within its wear grade, since the slide edges and muzzle show differences first.
• Look at the teal trigger and levers, as faded accents break the colour match with the decal.
• Note that Battle-Scarred copies are limited to the mild start of that grade due to the short float range.
• Inspect any applied stickers and name tag to make sure they fit the cyan and grey scheme.

Who should buy Minimal Wear

• Players who want a near-clean look without paying for the top grade.
• Crafters who accept tiny edge marks hidden from first-person view.
• Conclusion: the best balance of look and value.