MP5-SD | Co-Processor (Field-Tested)

Skin overview

Co-Processor turns the MP5-SD into a piece of hardware: blue circuit traces run over the receiver and handguard, contrasted by the grey suppressor and stock. In Field-Tested the blue starts to thin out on the top edges and around the sights, but the board motif is still easy to recognise. A practical middle ground for everyday play.

Item type: smg. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

Other qualities of this skin: Factory New, Minimal Wear, Well-Worn and Battle-Scarred.

Appearance in Field-Tested

The receiver, handguard and trigger group are finished in blue with a circuit board pattern of thin traces and small panel shapes. The front sight hood and rear sight are painted in the same blue, which links the top line of the weapon into one piece.

Wear becomes visible on the top edges of the receiver, the sight hoods and the charging handle, where the blue thins out and lighter metal shows through. The front corners of the handguard also pick up scuffs. The side panels still carry a readable circuit pattern. In game the weapon looks blue with a slightly used outline.

Field-Tested wear: float 0.15–0.38

The float of MP5-SD | Co-Processor ranges from 0 to 0.5; the Field-Tested quality covers 0.15–0.38 — 46% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

The skin’s collection is The 2018 Nuke Collection with 18 skins in total.

It drops from:

• Antwerp 2022 Nuke Souvenir Package
• Austin 2025 Nuke Souvenir Highlight Package
• Austin 2025 Nuke Souvenir Package
• Berlin 2019 Nuke Souvenir Package
• Budapest 2025 Nuke Souvenir Highlight Package
• Budapest 2025 Nuke Souvenir Package

And 7 more — souvenir packages and other sources.

Price by quality

Among 9 skins of the MP5-SD in the Mil-Spec Grade grade and this quality, this skin ranks 5th by price, counting from the dearest.

Souvenir version

There is also a the Souvenir version with tournament stickers.

Which stickers suit it

Blue, white and silver stickers continue the electronic theme of the circuit board. Holo or foil stickers in cool tones sit well on the blue receiver, while dark or grey stickers blend into the grey magazine and stock.

What to check before buying

• Check where the float sits within the wear range, since a low float in a grade keeps the receiver edges noticeably cleaner.
• Look at the top edges of the receiver, the sight hoods and the charging handle, as these lose the blue first.
• Souvenir copies come with stickers already applied, so check whether they suit the blue finish.
• Check the name tag and any applied stickers on the inspect screen before buying.

Who the Field-Tested quality suits

• Players who want the recognisable blue board for daily matches.
• Buyers looking for a balance between look and cost.
• A practical everyday choice.