P90 | Shapewood (Factory New)

Skin overview

P90 | Shapewood turns the polymer body of the SMG into a laminated wooden shell with light honey tones and dark contour lines running through the grain. In Factory New the laminate looks freshly sanded and evenly lit, with every layer line crisp from the muzzle shroud to the butt. This is the grade for buyers who want the carved-wood idea shown in full.

Item type: smg. Classified is the second-rarest weapon tier, only Covert sits above it.

Custom Paint Job: hand-painted across the whole body; this is the type where wear shows most, the artwork rubs down to metal.

Appearance in Factory New

The whole moulded body of the P90 — the front grip, the trigger guard loop, the thumbhole and the long stock — is covered in a light laminated wood finish with dark, wavy contour lines that follow the curves like cut plywood layers. Warmer orange-brown patches gather around the lower grip and trigger area, while the stock stays pale beige. The top rail, sights, receiver housing, magazine and the barrel with its muzzle device are left in dark grey metal, framing the wood. On worn copies the rounded edges of the grip, the rim of the thumbhole and the lower edge of the stock lose the finish first, followed by the flat sides of the body.

The wood laminate is intact on every part, with sharp contour lines and an even tone. The edges of the grip and the thumbhole are as clean as the flat sides. In game the gun shows a bright, uniform wooden body under the dark top rail. Nothing on the weapon looks handled.

Factory New wear: float 0–0.07

The float of P90 | Shapewood ranges from 0 to 1; the Factory New quality covers 0–0.07 — 7% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

P90 | Shapewood belongs to The Revolver Case Collection, which holds 17 skins.

The source is Revolver Case.

Price by quality

Taking Factory New as the baseline:

• Minimal Wear — 2.4× cheaper
• Field-Tested — 2.6× cheaper
• Well-Worn — 3× cheaper
• Battle-Scarred — 3.2× cheaper

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

Among 7 skins of the P90 in the Classified grade and this quality, this skin ranks 5th by price, counting from the dearest.

StatTrak™ and Souvenir

This skin has a the StatTrak™ version with a kill counter. Right now it is 2.1× dearer than the regular one. There is also a the Souvenir version with tournament stickers.

Which stickers suit it

Warm browns, golds, cream and muted greens sit naturally on the light wood, while dark or matte stickers echo the grey top rail. The wide flat side of the stock is the best spot for a centred sticker or a small row. Very bright neon colours tend to fight with the calm wooden tone.

What to check before buying

• Check where the float sits within the wear grade, since copies near the cleaner end keep the grip edges noticeably better.
• Inspect the front grip, the thumbhole rim and the bottom of the stock, as these lose the wood finish first.
• Look at how the darker orange-brown patches fall on the body, since their placement changes the overall feel of the wood.
• Check applied stickers and any name tag, because they change how the clean wooden sides read.

Who the Factory New quality suits

• Collectors who want the wood grain and contour lines in their cleanest form.
• Sticker crafters who need an untouched light background on the stock.
• Conclusion: the full version of the carved-wood idea.