Sawed-Off | Fusion (Factory New)

Skin overview

Sawed-Off | Fusion pairs a plain gunmetal shotgun with a receiver covered in dense black and gold swirls. In Factory New the gold lines stay crisp and the copper trim along the stock reads as one unbroken edge. This is the version for buyers who want the contrast between the dark metal and the patterned receiver exactly as designed.

Item type: shotgun. The weapon is available only on the Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Appearance in Factory New

The barrels, magazine tube and ribbed pump forend are finished in plain dark gunmetal grey with no pattern. The receiver carries the main artwork: a dense, flowing pattern of black and gold contour-like swirls that resembles marbled metal, and according to the description more detail shows up under different lighting. The pistol grip and stock are dark grey with a thin copper trim tracing their outline and the trigger guard area. On worn copies the copper trim, the receiver edges and the muzzle ends lose finish first, followed by the raised parts of the swirl panel.

The receiver swirls are sharp, with clear separation between black and gold. The copper trim on the grip and stock is complete and even. The dark barrels and forend have a uniform surface with no scratches. In game the gold panel stands out cleanly against the grey metal.

Factory New quality — float range 0–0.07

The whole float range of Sawed-Off | Fusion is 0–1; Factory New takes the 0–0.07 segment (7% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

The skin’s collection is The Dead Hand Collection with 17 skins in total.

It drops from Sealed Dead Hand Terminal.

What it costs in each quality

Compared with the Factory New quality, the others go like this:

• Minimal Wear — 3.1× cheaper
• Field-Tested — 6.5× cheaper
• Well-Worn — 7.4× cheaper
• Battle-Scarred — 8.7× cheaper

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

By price this skin is 9th of 13 skins Mil-Spec Grade Sawed-Off in this quality (the first being the dearest).

StatTrak™ and Souvenir

There is also a the StatTrak™ version: the counter on the weapon tracks kills. Right now it is 2× dearer than the regular one. There is also a the Souvenir version with tournament stickers.

Stickers and crafts

Gold, holo-gold or black stickers match the receiver artwork and the copper trim. Placing them on the plain grey barrels keeps the swirl panel uncovered and adds contrast to the dark metal.

What to check before buying

• Check where the float sits within the wear range, since cleaner copies keep the copper stock trim intact.
• Inspect the edges of the receiver panel, as the gold swirls fade there first.
• Look at the muzzle ends and the stock outline for early scratches.
• Check applied stickers and a name tag, which may change how the dark receiver looks.

Who should buy Factory New

• Collectors who want the gold swirls and copper trim fully intact.
• Sticker crafters who need a clean base for gold or black stickers.
• In short, the grade for those who value a flawless finish.