Souvenir P90 | Vent Rush (Factory New)

Skin overview

P90 | Vent Rush is a Restricted SMG finish that layers black tubes, ribbed cut-outs and strips of tape over a body that seems to glow with fire from inside. In Factory New the gloss on the black parts is unbroken, so the red and orange show through the grid with full contrast. This is the grade for buyers who want the artwork exactly as designed.

Item type: smg. Restricted sits in the middle of the rarity scale: noticeably rarer than Mil-Spec, yet not truly rare.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The remaining qualities of this skin: Minimal Wear, Field-Tested, Well-Worn and Battle-Scarred. The same quality also exists as the StatTrak™ version.

Appearance in Factory New

The receiver and upper rail are glossy black, with rows of rectangular cut-outs through which a red and orange fire pattern glows. The stock carries curved, tube-like ridges over the same fiery base, and the trigger guard and grip loops are smooth black with orange showing inside the openings.

Factory New copies show the black gloss intact on every part, from the rails to the stock. The red sight tips and muzzle ring are bright and sharp. In game the fire in the cut-outs stands out clearly against the dark body. Nothing on the weapon looks used.

Factory New quality — float range 0–0.07

The float of Souvenir P90 | Vent Rush ranges from 0 to 0.7; the Factory New quality covers 0–0.07 — 10% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

The skin’s collection is The Recoil Collection with 17 skins in total.

It drops from Recoil Case.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Stickers and crafts

Red, orange and black stickers continue the fire-and-metal palette, while holo or foil stickers in warm tones pick up the glow. Placements along the receiver near the cut-outs or on the stock keep the design balanced.

What to look at before you buy

• Check where the float sits within the wear range, since copies at the clean end of a grade keep more gloss on the rails.
• Look at the rail edges, the top of the receiver and the grip loops on the inspect screen, as these parts wear first.
• See whether the red sight tips and muzzle ring are still bright on worn copies.
• Check applied stickers and any name tag, and decide whether they suit you.

Who the Factory New quality suits

• Collectors who want the black gloss and fire glow fully intact.
• Players building sticker crafts where every part of the gun should look clean.
• The choice for those who want the design exactly as intended.