P250 | Iron Clad (Field-Tested)

Skin overview

Iron Clad is built on a simple idea: a pistol assembled from riveted green steel plates. In Field-Tested, light scuffs on the slide and frame edges start to show through the paint, which suits the utilitarian theme rather than spoiling it. The plate layout and rivet rows stay easy to read.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The remaining qualities of this skin: Factory New, Minimal Wear, Well-Worn and Battle-Scarred.

How the skin looks in Field-Tested

The slide is covered with olive-green plates divided by thin seam lines and edged with rows of small rivets, with a lighter yellow-green highlight towards the muzzle. The frame and trigger guard continue the same riveted panel layout, while the trigger stays in bright bare metal.

Small chips of bare metal show along the top and front edges of the slide, around the muzzle and on the rear serrations. Some raised rivet heads lose a little paint. The side panels of the slide and the frame keep their green colour and seam lines. In game the wear reads as light handling marks rather than damage.

Field-Tested wear: float 0.15–0.38

The whole float range of P250 | Iron Clad is 0.05–0.8; Field-Tested takes the 0.15–0.38 segment (31% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

P250 | Iron Clad belongs to The Gamma Collection, which holds 17 skins.

The source is Gamma Case.

What it costs in each quality

By price this skin is 9th of 17 skins Mil-Spec Grade P250 in this quality (the first being the dearest).

StatTrak™ and Souvenir

There is also a the StatTrak™ version: the counter on the weapon tracks kills. Right now it is 29% cheaper than the regular one. There is also a the Souvenir version with tournament stickers.

Which stickers suit it

Olive, khaki, black and metallic stickers match the riveted plate theme and blend with the green base. A single sticker placed on a flat slide panel between the rivet rows keeps the layout tidy, while bright colours will stand out sharply against the muted finish.

What to check before buying

• The float range does not start at the very bottom, so compare the float within the chosen grade rather than expecting a perfectly clean copy.
• Check the muzzle face, the slide edges and the rear serrations, since these are the first places to lose paint.
• Look at the rivet heads on the slide sides, because chipped rivets are visible in close-up inspection.
• Make sure any applied stickers or name tag are what you want, as they change the look of the plain panel layout.

Who should buy Field-Tested

• Players who like a lightly used look that suits the armour theme.
• Buyers who want the full pattern readable at a lower cost.
• A practical everyday option.