P250 | Iron Clad (Factory New)

Skin overview

P250 | Iron Clad covers the whole pistol in olive-green metal plates held together by rows of small rivets. In Factory New the seams, rivet heads and plate edges are sharp and even, so the armour-plate look reads clearly at any distance. This is the grade for a buyer who wants the panel drawing exactly as designed.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Other qualities of this skin: Minimal Wear, Field-Tested, Well-Worn and Battle-Scarred.

How the skin looks in Factory New

The slide is covered with olive-green plates divided by thin seam lines and edged with rows of small rivets, with a lighter yellow-green highlight towards the muzzle. The frame and trigger guard continue the same riveted panel layout, while the trigger stays in bright bare metal. The grip carries vertical plates with rivets along the seams, and the magazine base is a lighter grey-green. On worn copies the paint goes first from the muzzle face, the top and front edges of the slide, the rear serrations and the raised rivet heads, then from the grip edges and the magazine base.

The paint is intact on every part of the pistol, including the muzzle and slide edges. Seam lines and rivets are crisp, and the green tone is even from slide to grip. In game the plate pattern reads cleanly when inspected and from a normal viewing distance. Nothing on the weapon shows bare metal except the trigger, which is metal by design.

Factory New quality — float range 0.05–0.07

The float of P250 | Iron Clad ranges from 0.05 to 0.8; the Factory New quality covers 0.05–0.07 — 3% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

The skin’s collection is The Gamma Collection with 17 skins in total.

It drops from Gamma Case.

Price by quality

Among 17 skins of the P250 in the Mil-Spec Grade grade and this quality, this skin ranks 6th by price, counting from the dearest.

StatTrak™ and Souvenir

This skin has a the StatTrak™ version with a kill counter. Right now it is 1.6× cheaper than the regular one. There is also a the Souvenir version with tournament stickers.

Stickers and crafts

Olive, khaki, black and metallic stickers match the riveted plate theme and blend with the green base. A single sticker placed on a flat slide panel between the rivet rows keeps the layout tidy, while bright colours will stand out sharply against the muted finish.

What to look at before you buy

• The float range does not start at the very bottom, so compare the float within the chosen grade rather than expecting a perfectly clean copy.
• Check the muzzle face, the slide edges and the rear serrations, since these are the first places to lose paint.
• Look at the rivet heads on the slide sides, because chipped rivets are visible in close-up inspection.
• Make sure any applied stickers or name tag are what you want, as they change the look of the plain panel layout.

Who the Factory New quality suits

• Collectors who want the plate seams and rivets fully intact.
• Sticker crafters who need a clean, even green base.
• The choice for the cleanest look of this finish.