StatTrak™ P250 | Iron Clad (Factory New)

Skin overview

P250 | Iron Clad covers the whole pistol in olive-green metal plates held together by rows of small rivets. In Factory New the seams, rivet heads and plate edges are sharp and even, so the armour-plate look reads clearly at any distance. This is the grade for a buyer who wants the panel drawing exactly as designed.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Other qualities of this skin: Minimal Wear, Field-Tested, Well-Worn and Battle-Scarred. The same quality also exists as the Souvenir version.

How the skin looks in Factory New

The slide is covered with olive-green plates divided by thin seam lines and edged with rows of small rivets, with a lighter yellow-green highlight towards the muzzle. The frame and trigger guard continue the same riveted panel layout, while the trigger stays in bright bare metal.

The paint is intact on every part of the pistol, including the muzzle and slide edges. Seam lines and rivets are crisp, and the green tone is even from slide to grip. In game the plate pattern reads cleanly when inspected and from a normal viewing distance. Nothing on the weapon shows bare metal except the trigger, which is metal by design.

Factory New quality — float range 0.05–0.07

The whole float range of StatTrak™ P250 | Iron Clad is 0.05–0.8; Factory New takes the 0.05–0.07 segment (3% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

StatTrak™ P250 | Iron Clad belongs to The Gamma Collection, which holds 17 skins.

The source is Gamma Case.

What it costs in each quality

By price this skin is 3rd of 10 skins Mil-Spec Grade P250 in this quality (the first being the dearest).

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 1.6× cheaper than the regular one.

Stickers and crafts

Olive, khaki, black and metallic stickers match the riveted plate theme and blend with the green base. A single sticker placed on a flat slide panel between the rivet rows keeps the layout tidy, while bright colours will stand out sharply against the muted finish.

What to check before buying

• The float range does not start at the very bottom, so compare the float within the chosen grade rather than expecting a perfectly clean copy.
• Check the muzzle face, the slide edges and the rear serrations, since these are the first places to lose paint.
• Look at the rivet heads on the slide sides, because chipped rivets are visible in close-up inspection.
• Make sure any applied stickers or name tag are what you want, as they change the look of the plain panel layout.

Who should buy Factory New

• Collectors who want the plate seams and rivets fully intact.
• Sticker crafters who need a clean, even green base.
• The choice for the cleanest look of this finish.