StatTrak™ P250 | Iron Clad (Battle-Scarred)

Skin overview

Iron Clad dresses the P250 in green riveted panels, and in Battle-Scarred that plating is heavily stripped. Bare metal shows across the edges, muzzle and grip, giving a rough, patched look that fits the armour theme. It is the most affordable way to get the skin.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Other qualities of this skin: Factory New, Minimal Wear, Field-Tested and Well-Worn. The same quality also exists as the Souvenir version.

Appearance in Battle-Scarred

The slide is covered with olive-green plates divided by thin seam lines and edged with rows of small rivets, with a lighter yellow-green highlight towards the muzzle. The frame and trigger guard continue the same riveted panel layout, while the trigger stays in bright bare metal.

Large areas of the slide edges, muzzle and grip are stripped to metal, and the wear reaches into the side panels. Rivets and seams become harder to follow in the worn zones. The centre of the frame and parts of the slide sides still carry patches of green. In game the gun looks rough and heavily used, with the armour theme still visible in outline.

Battle-Scarred wear: float 0.45–0.8

The float of StatTrak™ P250 | Iron Clad ranges from 0.05 to 0.8; the Battle-Scarred quality covers 0.45–0.8 — 47% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

StatTrak™ P250 | Iron Clad belongs to The Gamma Collection, which holds 17 skins.

It drops from Gamma Case.

Price by quality

Among 8 skins of the P250 in the Mil-Spec Grade grade and this quality, this skin ranks 5th by price, counting from the dearest.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 19% cheaper than the regular one.

Which stickers suit it

Olive, khaki, black and metallic stickers match the riveted plate theme and blend with the green base. A single sticker placed on a flat slide panel between the rivet rows keeps the layout tidy, while bright colours will stand out sharply against the muted finish.

What to look at before you buy

• The float range does not start at the very bottom, so compare the float within the chosen grade rather than expecting a perfectly clean copy.
• Check the muzzle face, the slide edges and the rear serrations, since these are the first places to lose paint.
• Look at the rivet heads on the slide sides, because chipped rivets are visible in close-up inspection.
• Make sure any applied stickers or name tag are what you want, as they change the look of the plain panel layout.

Who the Battle-Scarred quality suits

• Buyers looking for the cheapest entry to this skin.
• Players who like a rough, stripped metal look.
• The budget option for those who accept heavy wear.