R8 Revolver | Crimson Web (Factory New)

Skin overview

R8 Revolver | Crimson Web covers the revolver in a deep red base with a thin dark spider-web pattern laid over it. In Factory New the red is even and saturated, and the web lines stay crisp across the frame and cylinder. It is the grade for a buyer who wants the web to read as a clean, deliberate pattern rather than a worn texture.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Hydrographic: the pattern is applied as a film over the metal; wear rubs it down to the base, starting with raised parts.

Appearance in Factory New

The frame, barrel shroud, top rail, cylinder, hammer and trigger guard are painted red, with a thin dark spider-web pattern applied over them by hydrographic print. The under-barrel rail stays dark grey, and the rubber grip is left plain dark grey with its finger grooves unpainted. The semi-gloss topcoat gives the red a soft sheen rather than a flat look. On worn copies the paint goes first from the muzzle rim, the ridges of the top rail, the cylinder flutes and edges, the hammer and the curve of the trigger guard, exposing grey metal underneath. Flat side surfaces of the frame and barrel hold the colour and the web the longest.

The red base is uniform and the web lines are sharp on every painted part. The muzzle rim, rail ridges and cylinder edges show no visible chipping. In game the revolver looks bright and clean even up close in the inspect view. This grade covers only a narrow band at the bottom of the float range, so it is the hardest to find.

Factory New quality — float range 0.06–0.07

The float of R8 Revolver | Crimson Web ranges from 0.06 to 0.8; the Factory New quality covers 0.06–0.07 — 1% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

The skin’s collection is The Revolver Case Collection with 17 skins in total.

The source is Revolver Case.

Price by quality

Compared with the Factory New quality, the others go like this:

• Minimal Wear — 11× cheaper
• Field-Tested — 29× cheaper
• Well-Worn — 30× cheaper
• Battle-Scarred — 32× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

By price this skin is 2nd of 9 skins Mil-Spec Grade R8 Revolver in this quality (the first being the dearest).

StatTrak™ and Souvenir

This skin has a the StatTrak™ version with a kill counter. Right now it is 3× dearer than the regular one. There is also a the Souvenir version with tournament stickers.

Stickers and crafts

Black, white and silver stickers sit well on the red frame and echo the dark web lines. Red or dark red stickers blend into the finish for a tonal craft, while gold accents stand out without clashing.

What to look at before you buy

• Check where the float sits within the wear grade, since low and high copies of the same grade can look noticeably different on the edges.
• Look at how the web lines fall on the visible side of the frame and cylinder, because pattern placement varies between copies.
• Inspect the muzzle rim, top rail ridges, cylinder and trigger guard, as these lose paint first.
• Make sure any applied stickers or name tag fit the look you want, since they stay on the item.

Who should buy Factory New

• Collectors who want the web pattern as crisp and complete as possible.
• Sticker crafters who need a clean red base without chipped edges.
• The choice for those who value a flawless finish over price.