StatTrak™ R8 Revolver | Grip (Minimal Wear)

Skin overview

The skin is built on contrast: near-black textured steel against a cool, marbled blue grip. At Minimal Wear the difference from a factory-fresh copy comes down to faint marks on edges that are hard to spot in game. It gives almost the same look while usually leaving more room in the budget.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The same quality also exists as the Souvenir version.

Appearance in Minimal Wear

The barrel shroud, frame and cylinder are finished in dark gunmetal covered with a fine pressed, knurl-like texture, with polished steel showing on the cylinder flutes, hammer and trigger guard. The top rail and the edges of the barrel stay dark and sharp, framing the textured panels.

Tiny light marks can appear on the muzzle edge and the corners of the top rail. The textured panels and cylinder remain clean, and the grip colours are unchanged. At normal viewing distance it is practically indistinguishable from Factory New. Only close inspection reveals the small scuffs.

Minimal Wear quality — float range 0.07–0.15

The whole float range of StatTrak™ R8 Revolver | Grip is 0–1; Minimal Wear takes the 0.07–0.15 segment (8% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The Clutch Collection with 17 skins in total.

It drops from Clutch Case.

What it costs in each quality

Compared with the Minimal Wear quality, the others go like this:

• Factory New — 5.1× dearer
• Field-Tested — 1.5× cheaper
• Well-Worn — 1.6× cheaper
• Battle-Scarred — 1.6× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 7 skins of the R8 Revolver in the Mil-Spec Grade grade and this quality, this skin ranks 6th by price, counting from the dearest.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 38% dearer than the regular one.

Stickers and crafts

Stickers in blue, teal, white or silver tie in with the grip and the polished steel. Holo or foil stickers in cool tones work well on the dark barrel shroud, while placements on the frame keep the textured metal visible.

What to look at before you buy

• Check where the float sits within the wear range, since copies near the cleaner end of a grade show noticeably less scratching on the barrel and rail.
• Inspect the barrel edges, top rail and cylinder rim, which are the first places the dark coating wears through.
• Look at the front of the grip and the finger grooves to see how much of the blue pattern has faded.
• Note any applied stickers or name tag and whether they suit the dark body and blue handle.

Who the Minimal Wear quality suits

• Players who want a near-clean look without paying for the top grade.
• Sticker crafters for whom tiny edge marks do not matter.
• Conclusion: a sensible balance between appearance and cost.