StatTrak™ R8 Revolver | Grip (Well-Worn)

Skin overview

This Gunsmith finish relies on texture rather than bright paint, so it ages in a quiet way. In Well-Worn the dark metal shows lighter scratched patches along the top rail, barrel and cylinder, and the grip pattern starts to look faded at the front. The revolver takes on a used, working-tool character that suits the finish.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The same quality also exists as the Souvenir version.

How the skin looks in Well-Worn

The barrel shroud, frame and cylinder are finished in dark gunmetal covered with a fine pressed, knurl-like texture, with polished steel showing on the cylinder flutes, hammer and trigger guard. The top rail and the edges of the barrel stay dark and sharp, framing the textured panels.

Larger scratched patches cover the barrel shroud, top rail and cylinder, and the hammer and frame edges show bare metal. The pressed texture is broken up by worn areas, so the metal looks uneven. The grip pattern is faded at the front and around the finger grooves, though the blue tone is still recognisable. At normal distance the gun looks clearly worn but keeps its colour scheme.

Well-Worn wear: float 0.38–0.45

The float of StatTrak™ R8 Revolver | Grip ranges from 0 to 1; the Well-Worn quality covers 0.38–0.45 — 7% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

The skin’s collection is The Clutch Collection with 17 skins in total.

The source is Clutch Case.

Price by quality

Compared with the Well-Worn quality, the others go like this:

• Factory New — 8.3× dearer
• Minimal Wear — 1.6× dearer
• Field-Tested — 6% dearer
• Battle-Scarred — about the same

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

Among 7 skins of the R8 Revolver in the Mil-Spec Grade grade and this quality, this skin is the most affordable.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 6% dearer than the regular one.

Which stickers suit it

Stickers in blue, teal, white or silver tie in with the grip and the polished steel. Holo or foil stickers in cool tones work well on the dark barrel shroud, while placements on the frame keep the textured metal visible.

What to check before buying

• Check where the float sits within the wear range, since copies near the cleaner end of a grade show noticeably less scratching on the barrel and rail.
• Inspect the barrel edges, top rail and cylinder rim, which are the first places the dark coating wears through.
• Look at the front of the grip and the finger grooves to see how much of the blue pattern has faded.
• Note any applied stickers or name tag and whether they suit the dark body and blue handle.

Who the Well-Worn quality suits

• Budget-minded players who still want the dark-and-blue colour scheme.
• Fans of a worn, working-tool look on revolvers.
• Conclusion: an inexpensive option with a distinct used character.