StatTrak™ R8 Revolver | Grip (Field-Tested)

Skin overview

Grip is recognised by its blue rubber handle with flowing white veins and the dense pressed pattern covering the metal. In Field-Tested light scuffs appear on the raised edges of the barrel and cylinder, while the grip keeps its colour well. The overall silhouette and blue accent still read clearly at normal distance.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The same quality also exists as the Souvenir version.

How the skin looks in Field-Tested

The barrel shroud, frame and cylinder are finished in dark gunmetal covered with a fine pressed, knurl-like texture, with polished steel showing on the cylinder flutes, hammer and trigger guard. The top rail and the edges of the barrel stay dark and sharp, framing the textured panels.

Visible scuffs run along the barrel edges, the top rail and the cylinder rim, where bare steel starts to show through the dark coating. The pressed texture on the frame is still readable, though slightly softened in places. The grip keeps most of its colour, with light fading at the front edge. In game the skin reads as lightly used while the blue accent stays strong.

Field-Tested quality — float range 0.15–0.38

The whole float range of StatTrak™ R8 Revolver | Grip is 0–1; Field-Tested takes the 0.15–0.38 segment (23% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The Clutch Collection with 17 skins in total.

The source is Clutch Case.

What it costs in each quality

Compared with the Field-Tested quality, the others go like this:

• Factory New — 7.8× dearer
• Minimal Wear — 1.5× dearer
• Well-Worn — 5% cheaper
• Battle-Scarred — 5% cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

By price this skin is 6th of 7 skins Mil-Spec Grade R8 Revolver in this quality (the first being the dearest).

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 12% dearer than the regular one.

Stickers and crafts

Stickers in blue, teal, white or silver tie in with the grip and the polished steel. Holo or foil stickers in cool tones work well on the dark barrel shroud, while placements on the frame keep the textured metal visible.

What to look at before you buy

• Check where the float sits within the wear range, since copies near the cleaner end of a grade show noticeably less scratching on the barrel and rail.
• Inspect the barrel edges, top rail and cylinder rim, which are the first places the dark coating wears through.
• Look at the front of the grip and the finger grooves to see how much of the blue pattern has faded.
• Note any applied stickers or name tag and whether they suit the dark body and blue handle.

Who should buy Field-Tested

• Players who want the blue grip clearly visible in game on a moderate budget.
• Buyers who like a lightly used look on the metal parts.
• Conclusion: a practical everyday choice that keeps the skin's character.