1.81 $
StatTrak™ M4A4 | Etch Lord (Minimal Wear)
- Type
- Rifle
- Weapon
- M4A4
- Rarity
- Restricted
- Collection
- The Kilowatt Collection
Offers 0
No offers available
Similar skins
Show allAllSkin overview
Etch Lord dresses the M4A4 in dark bronze-tinted metal with an ornate etched pattern around the magazine well. In Minimal Wear the finish keeps its engraved character almost entirely, and any marks are tiny and limited to edges. It gives nearly the Factory New look for players who do not need a perfect copy.
Item type: rifle. The weapon is available only on the Counter-Terrorist side. Restricted sits in the middle of the rarity scale: noticeably rarer than Mil-Spec, yet not truly rare.
Gunsmith: several techniques combined on one item; some parts rub off, others only dull.
The same quality also exists as the Souvenir version.
Appearance in Minimal Wear
The finish covers the barrel, front sight and receiver in dark gunmetal with warm bronze and brown tones. The main detail is a fine etched ornament on the receiver sides around the magazine well and above the trigger, drawn in thin dark lines on the metal.
Small marks may appear on the muzzle tip and the edges of the front and rear sights. The engraving on the receiver stays sharp and complete. The magazine, grip and stock remain clean. At normal distance in game it is practically indistinguishable from Factory New.
Minimal Wear quality — float range 0.07–0.15
The whole float range of StatTrak™ M4A4 | Etch Lord is 0–1; Minimal Wear takes the 0.07–0.15 segment (8% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.
Origin of the skin
StatTrak™ M4A4 | Etch Lord belongs to The Kilowatt Collection, which holds 17 skins.
The source is Kilowatt Case.
What it costs in each quality
Compared with the Minimal Wear quality, the others go like this:
- Factory New — 3.6× dearer
- Field-Tested — 2.3× cheaper
- Well-Worn — 2.7× cheaper
- Battle-Scarred — 2.6× cheaper
Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.
Among 6 skins of the M4A4 in the Restricted grade and this quality, this skin is the most affordable.
StatTrak™ version
This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 2.5× dearer than the regular one.
Stickers and crafts
Gold, bronze, sepia and dark metallic stickers match the engraved-metal look of Etch Lord. Muted or monochrome designs keep the attention on the etched receiver, while bright neon stickers tend to clash with the restrained palette.
What to check before buying
- Look at where the float sits within its wear grade, since lower floats keep the muzzle, sights and rail edges cleaner.
- Inspect the etched ornament on the receiver, as its sharpness defines how this skin reads.
- Check the magazine and stock edges on Field-Tested and lower copies, because they lose coating early.
- Note any stickers or name tag already applied and whether they suit the dark bronze finish.
Who the Minimal Wear quality suits
- Players who want a near-perfect look without paying for Factory New.
- Sticker crafters for whom tiny edge marks do not matter.
- A sensible balance between appearance and cost.