Souvenir M4A4 | Etch Lord (Minimal Wear)

Skin overview

Etch Lord dresses the M4A4 in dark bronze-tinted metal with an ornate etched pattern around the magazine well. In Minimal Wear the finish keeps its engraved character almost entirely, and any marks are tiny and limited to edges. It gives nearly the Factory New look for players who do not need a perfect copy.

Item type: rifle. The weapon is available only on the Counter-Terrorist side. Restricted sits in the middle of the rarity scale: noticeably rarer than Mil-Spec, yet not truly rare.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The remaining qualities of this skin: Well-Worn. The same quality also exists as the StatTrak™ version.

Appearance in Minimal Wear

The finish covers the barrel, front sight and receiver in dark gunmetal with warm bronze and brown tones. The main detail is a fine etched ornament on the receiver sides around the magazine well and above the trigger, drawn in thin dark lines on the metal.

Small marks may appear on the muzzle tip and the edges of the front and rear sights. The engraving on the receiver stays sharp and complete. The magazine, grip and stock remain clean. At normal distance in game it is practically indistinguishable from Factory New.

Minimal Wear quality — float range 0.07–0.15

The whole float range of Souvenir M4A4 | Etch Lord is 0–1; Minimal Wear takes the 0.07–0.15 segment (8% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The Kilowatt Collection with 17 skins in total.

It drops from Kilowatt Case.

What it costs in each quality

Taking Minimal Wear as the baseline:

• Factory New — 6% dearer
• Field-Tested — 13% cheaper
• Battle-Scarred — 2.1× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 8 skins of the M4A4 in the Restricted grade and this quality, this skin ranks 5th by price, counting from the dearest.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Stickers and crafts

Gold, bronze, sepia and dark metallic stickers match the engraved-metal look of Etch Lord. Muted or monochrome designs keep the attention on the etched receiver, while bright neon stickers tend to clash with the restrained palette.

What to look at before you buy

• Look at where the float sits within its wear grade, since lower floats keep the muzzle, sights and rail edges cleaner.
• Inspect the etched ornament on the receiver, as its sharpness defines how this skin reads.
• Check the magazine and stock edges on Field-Tested and lower copies, because they lose coating early.
• Note any stickers or name tag already applied and whether they suit the dark bronze finish.

Who the Minimal Wear quality suits

• Players who want a near-perfect look without paying for Factory New.
• Sticker crafters for whom tiny edge marks do not matter.
• A sensible balance between appearance and cost.