StatTrak™ PP-Bizon | Harvester (Factory New)

Skin overview

PP-Bizon | Harvester is a Mil-Spec Grade Gunsmith finish that turns the SMG into a dark, almost monochrome piece decorated with a bio-mechanical motif. In Factory New the gunmetal and olive tones keep an even sheen, and the fine organic-looking lines on the receiver stay crisp against the dark base. This is the cleanest way to see the finish as intended.

Item type: smg. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The same quality also exists as the Souvenir version.

Appearance in Factory New

The receiver and upper handguard are covered in a dark gunmetal coat with a soft metallic sheen and thin bio-mechanical lines running along the body. The cylindrical drum magazine under the barrel and the pistol grip carry a slightly warmer olive-grey tone, giving the gun a muted two-tone look.

The dark coat is complete on every part, with no exposed metal on the muzzle, receiver edges or drum magazine. The bio-mechanical lines are sharp and the metallic sheen is even. In game the gun looks uniformly dark and glossy at any distance. The whole weapon is clean.

Factory New quality — float range 0–0.07

The whole float range of StatTrak™ PP-Bizon | Harvester is 0–1; Factory New takes the 0–0.07 segment (7% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The Gamma Collection with 17 skins in total.

The source is Gamma Case.

What it costs in each quality

Compared with the Factory New quality, the others go like this:

• Minimal Wear — 6× cheaper
• Field-Tested — 7.9× cheaper
• Well-Worn — 11× cheaper
• Battle-Scarred — 11× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 9 skins of the PP-Bizon in the Mil-Spec Grade grade and this quality, this skin ranks 5th by price, counting from the dearest.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 31% cheaper than the regular one.

Stickers and crafts

The dark, near-monochrome finish works well with black, silver, olive or holo-grey stickers that keep the restrained look. A single bright accent in red or gold along the receiver stands out sharply against the gunmetal base.

What to look at before you buy

• Check where the float sits within the chosen wear, since a low value keeps the drum magazine and muzzle noticeably cleaner.
• Look at the front cap and underside of the drum magazine, as they show bare metal first on this finish.
• Inspect the top edges of the receiver, where wear makes the fine bio-mechanical lines lose contrast.
• Make sure applied stickers or a name tag match your plans, because scraped or random stickers change the look of a dark skin.

Who the Factory New quality suits

• Collectors who want the dark finish with an even sheen and crisp bio-mechanical lines.
• Sticker crafters who need a clean, uniform base for a monochrome build.
• The best choice if you want the skin exactly as designed.