StatTrak™ Tec-9 | Flash Out (Battle-Scarred)

Skin overview

In Battle-Scarred the copper and teal of Flash Out are broken by heavy chips that show dark metal underneath, mostly at the front of the pistol. Some players prefer this rough look, as if the pistol had been through every round of a match. It is the cheapest way to own the design.

Item type: pistol. The weapon is available only on the Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Custom Paint Job: hand-painted across the whole body; this is the type where wear shows most, the artwork rubs down to metal.

The remaining qualities of this skin: Factory New, Minimal Wear, Field-Tested and Well-Worn. The same quality also exists as the Souvenir version.

How the skin looks in Battle-Scarred

The perforated barrel shroud is painted metallic copper-orange with dark round holes, and a mint-teal band runs around its rear section. The upper receiver continues in copper with a green stripe along its lower edge and small markings near the rear.

Heavy chipping covers the shroud, the muzzle and the top of the receiver, and the teal band is broken by bare spots. The magazine and grip edges are worn, with patchy grey paint. In game the front of the pistol looks rough and darker. The flat sides of the receiver and the lower body hold the most colour.

Battle-Scarred wear: float 0.45–0.7

The whole float range of StatTrak™ Tec-9 | Flash Out is 0–0.7; Battle-Scarred takes the 0.45–0.7 segment (36% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The CS20 Collection with 17 skins in total.

The source is CS20 Case.

What it costs in each quality

By price this skin is 7th of 11 skins Mil-Spec Grade Tec-9 in this quality (the first being the dearest).

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 19% cheaper than the regular one.

Which stickers suit it

Stickers in copper, orange, gold or teal tones match the upper and the shroud band. Placements on the grey lower receiver above the magazine keep the grenade theme on the upper clear, while white or grey stickers blend into the pale magazine.

What to look at before you buy

• Check where the float sits within its wear range, since copies at the cleaner end look noticeably better on the shroud.
• Inspect the muzzle and the edges of the shroud holes, as the copper wears there first.
• Look at the pale magazine, because scuffs show up clearly on its light paint.
• Note any stickers or name tag already applied and whether they suit the copper and teal scheme.

Who should buy Battle-Scarred

• Players who want the design at the lowest entry cost.
• Fans of a rough, heavily chipped style.
• The budget entry into this skin.