★ StatTrak™ M9 Bayonet | Gamma Doppler (Factory New) Phase 1

Skin overview

★ M9 Bayonet | Gamma Doppler (Phase 1) is a knife with a marbled candy-coated blade in deep blue and violet, crossed by green streaks and dark smoky swirls. In Factory New the coating sits unbroken from the tip to the guard, so the colour transitions and the fine marbling read cleanly. This is the grade for a buyer who wants the Phase 1 colours exactly as the finish was meant to look.

Item type: knife. Covert is the top weapon rarity: usually the most prominent items of a collection or case.

Anodized Multicolored: several colours in the metal coating; it wears little, the colours only dull with use.

Other qualities of this skin: Minimal Wear.

Appearance in Factory New

The blade carries the whole finish: a blue and violet candy coat over black and silver metallic marbling, with green streaks running along the middle and toward the spine. Dark smoky swirls break up the colour and give each blade its own marbled pattern.

The coating is intact along the full blade, including the tip and the spine teeth. Only the cleaner copies of the grade can be fully spotless, but any marks at this level are not visible in normal play. In inspect and in hand the blue, violet and green read as solid colour with clear marbling. The guard, ring and pommel look clean.

Factory New wear: float 0–0.07

The whole float range of ★ StatTrak™ M9 Bayonet | Gamma Doppler Phase 1 is 0–0.08; Factory New takes the 0–0.07 segment (88% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

It drops as a rare special item from:

• Gamma Case
• Gamma 2 Case

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter.

What to check before buying

• Inspect the pattern, since the share of green, blue and dark marbling on the blade differs from copy to copy.
• Check the tip and the cutting edge for light spots of bare metal.
• Look at the float position within the grade if you want a copy that is as clean as possible.
• Check for a name tag and whether the copy is StatTrak™ if that matters to you.

Who should buy Factory New

• Collectors who want the Phase 1 colours without any marks on the blade.
• Players who often inspect their knife and look closely at the marbling.
• The cleanest way to own this phase.