StatTrak™ Dual Berettas | Tread (Field-Tested)

Skin overview

The Tread finish gives the Dual Berettas a crafted, workshop look: etched gold slides, dark frames and grips with a tread-like rib pattern. In Field-Tested the gold starts to thin along edges and around the muzzle, letting darker metal show through. The etching still reads clearly, so the pistols keep their character at normal viewing distance.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

The same quality also exists as the Souvenir version.

How the skin looks in Field-Tested

The slides of both pistols are painted gold and covered with a fine etched wave pattern that fills the flat panels and gives them a woven, textured look. The frames, trigger guards and barrels stay in dark gunmetal grey, framing the gold sections.

The gold wears along the slide edges, the muzzle ends and the rear serrations, showing darker metal underneath. Light scratches start to appear on the frames and on the raised grip ribs. The etched waves on the central panels still read well, so in game the pistols look used but tidy.

Field-Tested wear: float 0.15–0.38

The whole float range of StatTrak™ Dual Berettas | Tread is 0–1; Field-Tested takes the 0.15–0.38 segment (23% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

StatTrak™ Dual Berettas | Tread belongs to The Operation Riptide Collection, which holds 17 skins.

It drops from Operation Riptide Case.

What it costs in each quality

Compared with the Field-Tested quality, the others go like this:

• Factory New — 4.9× dearer
• Minimal Wear — 2.2× dearer
• Well-Worn — 29% cheaper
• Battle-Scarred — 33% cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

By price this skin is 5th of 11 skins Mil-Spec Grade Dual Berettas in this quality (the first being the dearest).

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 1.7× dearer than the regular one.

Which stickers suit it

Gold, bronze and holo stickers in warm tones match the etched slides, while black or dark grey stickers blend into the frames for a restrained look. Placing stickers on the dark frames rather than over the gold panels keeps the etching visible.

What to look at before you buy

• Check where the float sits within the wear range, since gold loss on the slides grows noticeably toward the dirtier end.
• Inspect the slide edges, muzzle ends and rear serrations, as these are the first areas where the gold thins.
• Look at the raised ribs of the grips, which show bare metal on more worn copies.
• Note any applied stickers or name tag, since they change the look of the dark frames and gold slides.

Who should buy Field-Tested

• Players who want the design to read clearly in game at a moderate cost.
• Those who like a slightly worn, handled look on the gold slides.
• Conclusion: a practical everyday choice.