StatTrak™ R8 Revolver | Crimson Web (Field-Tested)

Skin overview

Crimson Web on the R8 Revolver is recognisable by its strong red colour and the dark web lines running across the frame, barrel and cylinder. In Field-Tested the red still dominates, but grey metal starts to show through on edges, the muzzle and the cylinder. The scuffs suit the rough, used character of the design.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Hydrographic: the pattern is applied as a film over the metal; wear rubs it down to the base, starting with raised parts.

The same quality also exists as the Souvenir version.

Appearance in Field-Tested

The frame, barrel shroud, top rail, cylinder, hammer and trigger guard are painted red, with a thin dark spider-web pattern applied over them by hydrographic print. The under-barrel rail stays dark grey, and the rubber grip is left plain dark grey with its finger grooves unpainted.

Grey metal shows clearly on the muzzle, rail ridges, cylinder flutes and the hammer, and small chips appear on the trigger guard. The web starts to break up where the edges are worn, but stays intact on the flat sides. In game the revolver still reads as red with a visible pattern. Low-float copies look close to Minimal Wear, while high-float ones show noticeably more scuffing.

Field-Tested wear: float 0.15–0.38

The float of StatTrak™ R8 Revolver | Crimson Web ranges from 0.06 to 0.8; the Field-Tested quality covers 0.15–0.38 — 31% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

The skin’s collection is The Revolver Case Collection with 17 skins in total.

It drops from Revolver Case.

Price by quality

Taking Field-Tested as the baseline:

• Factory New — 63× dearer
• Minimal Wear — 6× dearer
• Well-Worn — 16% cheaper
• Battle-Scarred — 33% cheaper

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

Among 7 skins of the R8 Revolver in the Mil-Spec Grade grade and this quality, this skin ranks 2nd by price, counting from the dearest.

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 39% dearer than the regular one.

Which stickers suit it

Black, white and silver stickers sit well on the red frame and echo the dark web lines. Red or dark red stickers blend into the finish for a tonal craft, while gold accents stand out without clashing.

What to check before buying

• Check where the float sits within the wear grade, since low and high copies of the same grade can look noticeably different on the edges.
• Look at how the web lines fall on the visible side of the frame and cylinder, because pattern placement varies between copies.
• Inspect the muzzle rim, top rail ridges, cylinder and trigger guard, as these lose paint first.
• Make sure any applied stickers or name tag fit the look you want, since they stay on the item.

Who the Field-Tested quality suits

• Players who want the red and the web clearly visible in matches at a moderate cost.
• Those who like a slightly used look on a revolver.
• A practical everyday choice, best with a low float within the grade.