StatTrak™ R8 Revolver | Crimson Web (Minimal Wear)

Skin overview

This R8 Revolver is finished in solid crimson with a dark web pattern traced over the metal parts and a plain dark grip. At Minimal Wear the finish looks almost the same as the cleanest grade, with only faint marks on sharp edges that are hard to spot in game. It gives nearly the full look of the skin without paying for the top grade.

Item type: pistol. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Hydrographic: the pattern is applied as a film over the metal; wear rubs it down to the base, starting with raised parts.

The same quality also exists as the Souvenir version.

How the skin looks in Minimal Wear

The frame, barrel shroud, top rail, cylinder, hammer and trigger guard are painted red, with a thin dark spider-web pattern applied over them by hydrographic print. The under-barrel rail stays dark grey, and the rubber grip is left plain dark grey with its finger grooves unpainted.

Tiny specks of wear may appear on the muzzle rim, the top rail ridges and the cylinder edges. The flat sides of the frame and barrel stay fully clean, and the web remains easy to read. At normal distance in game it is practically indistinguishable from Factory New. Differences show only when you inspect the revolver closely.

Minimal Wear wear: float 0.07–0.15

The float of StatTrak™ R8 Revolver | Crimson Web ranges from 0.06 to 0.8; the Minimal Wear quality covers 0.07–0.15 — 11% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

The skin’s collection is The Revolver Case Collection with 17 skins in total.

The source is Revolver Case.

Price by quality

Taking Minimal Wear as the baseline:

• Factory New — 11× dearer
• Field-Tested — 6× cheaper
• Well-Worn — 7.2× cheaper
• Battle-Scarred — 8.9× cheaper

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

By price this skin is 2nd of 7 skins Mil-Spec Grade R8 Revolver in this quality (the first being the dearest).

StatTrak™ version

This is the StatTrak™ version: the counter on the weapon shows confirmed kills. There is also the regular version without the counter. Right now the StatTrak™ version is 3.2× dearer than the regular one.

Which stickers suit it

Black, white and silver stickers sit well on the red frame and echo the dark web lines. Red or dark red stickers blend into the finish for a tonal craft, while gold accents stand out without clashing.

What to check before buying

• Check where the float sits within the wear grade, since low and high copies of the same grade can look noticeably different on the edges.
• Look at how the web lines fall on the visible side of the frame and cylinder, because pattern placement varies between copies.
• Inspect the muzzle rim, top rail ridges, cylinder and trigger guard, as these lose paint first.
• Make sure any applied stickers or name tag fit the look you want, since they stay on the item.

Who should buy Minimal Wear

• Players who want a near-clean look without paying for the top grade.
• Crafters who are fine with tiny edge marks that do not show in game.
• A sensible balance between appearance and cost.