0.58 $
MAG-7 | Copper Coated (Battle-Scarred)
- Type
- Shotgun
- Weapon
- MAG-7
- Rarity
- Mil-Spec Grade
- Collection
- The Anubis Collection
- Other category
- Souvenir
Offers 0
No offers available
Similar skins
Show allAllSkin overview
MAG-7 | Copper Coated pairs a coppery etched receiver with dark and steel-grey parts. In Battle-Scarred much of the copper is worn through on edges and raised areas, leaving a patchy, scraped metal look that fits the accidental-coating story. It is the most rugged way to own this finish.
Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.
Gunsmith: several techniques combined on one item; some parts rub off, others only dull.
Appearance in Battle-Scarred
The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel.
Large areas of the copper coat are worn off on the receiver, muzzle, foregrip and magazine edges. The etched pattern is broken up by scrapes and is hard to follow in places. In game the gun reads as rough, mottled metal with remaining copper spots. The deepest recesses on the receiver sides are the last places with clean colour.
Battle-Scarred wear: float 0.45–1
The float of MAG-7 | Copper Coated ranges from 0 to 1; the Battle-Scarred quality covers 0.45–1 — 55% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.
Where the skin comes from: collection and case
MAG-7 | Copper Coated belongs to The Anubis Collection, which holds 19 skins.
It drops from:
Price by quality
Taking Battle-Scarred as the baseline:
- Factory New — 5.1× dearer
- Minimal Wear — 3× dearer
- Field-Tested — 1.5× dearer
- Well-Worn — 31% dearer
Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.
By price this skin is 4th of 10 skins Mil-Spec Grade MAG-7 in this quality (the first being the dearest).
Souvenir version
There is also a the Souvenir version with tournament stickers.
Which stickers suit it
Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.
What to check before buying
- Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
- Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
- Inspect the foregrip curve and magazine corners for scrapes that break the finish.
- Check for applied stickers or a name tag and whether they suit the brown-and-copper look.
Who should buy Battle-Scarred
- Players who enjoy rough, scraped metal looks.
- The cheapest way to try the finish before deciding on a cleaner grade.
- For those who value character over clean lines.