Out of stock
MAG-7 | Copper Coated (Minimal Wear)
Rating 4.9 / 31 votes

1.76 $

MAG-7 | Copper Coated (Minimal Wear)

Weapon
MAG-7
Collection
The Anubis Collection
Other category
Souvenir

Offers 0

No offers available

Similar skins

Show allAll

Skin overview

This is the copper-flow MAG-7: a warm brown receiver with recessed geometric panels and cool steel parts around it. Minimal Wear keeps the etched pattern and the copper sheen practically intact, with only slight marks on the sharpest edges. It gives nearly the same look as the cleanest grade and is the sensible choice if you want a fresh copy without chasing the top float.

Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Appearance in Minimal Wear

The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel.

Small light marks may appear on the muzzle tip and the sharpest edges of the receiver. The etched pattern and copper tone remain fully intact. At normal viewing distance it is hard to tell apart from Factory New. The foregrip, magazine and side panels stay clean.

Minimal Wear quality — float range 0.07–0.15

The whole float range of MAG-7 | Copper Coated is 0–1; Minimal Wear takes the 0.07–0.15 segment (8% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

MAG-7 | Copper Coated belongs to The Anubis Collection, which holds 19 skins.

It drops from:

What it costs in each quality

Taking Minimal Wear as the baseline:

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

By price this skin is 6th of 14 skins Mil-Spec Grade MAG-7 in this quality (the first being the dearest).

Souvenir version

There is also a the Souvenir version with tournament stickers.

Stickers and crafts

Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.

What to check before buying

  • Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
  • Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
  • Inspect the foregrip curve and magazine corners for scrapes that break the finish.
  • Check for applied stickers or a name tag and whether they suit the brown-and-copper look.

Who should buy Minimal Wear

  • Players who want a clean-looking MAG-7 without paying for the top grade.
  • Crafters for whom tiny edge marks do not matter.
  • Nearly the full look at a more reasonable grade.
Sell