MAG-7 | Copper Coated (Factory New)

Skin overview

MAG-7 | Copper Coated is a Mil-Spec Grade shotgun skin that looks as if the gun was held under a stream of liquid copper. A dark brown body with an etched panel pattern carries copper tones in its grooves, set against a smooth dark foregrip and a steel-grey magazine. In Factory New the copper layer is even and the fine engraved lines stay crisp across the whole receiver.

Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

How the skin looks in Factory New

The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel. The magazine and trigger guard are a lighter steel grey with faint copper speckling near the base. On worn copies the coating goes first on the top edge of the receiver, the muzzle, the front of the foregrip and the corners of the magazine, where bare metal shows through.

The copper coat is uniform and the engraved panels keep sharp, clean lines. The foregrip and magazine show an unbroken sheen with no scuffs. In game the receiver reads as a deep, warm brown with clear detailing. Every part of the weapon looks fresh.

Factory New wear: float 0–0.07

The float of MAG-7 | Copper Coated ranges from 0 to 1; the Factory New quality covers 0–0.07 — 7% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

MAG-7 | Copper Coated belongs to The Anubis Collection, which holds 19 skins.

It drops from:

• Anubis Collection Package (on sale since Apr 24, 2023)
• Austin 2025 Anubis Souvenir Highlight Package
• Austin 2025 Anubis Souvenir Package
• Copenhagen 2024 Anubis Souvenir Package
• Paris 2023 Anubis Souvenir Package
• Shanghai 2024 Anubis Souvenir Package

Price by quality

Compared with the Factory New quality, the others go like this:

• Minimal Wear — 1.7× cheaper
• Field-Tested — 3.4× cheaper
• Well-Worn — 3.9× cheaper
• Battle-Scarred — 5.1× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 14 skins of the MAG-7 in the Mil-Spec Grade grade and this quality, this skin ranks 7th by price, counting from the dearest.

Souvenir version

There is also a the Souvenir version with tournament stickers.

Which stickers suit it

Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.

What to look at before you buy

• Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
• Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
• Inspect the foregrip curve and magazine corners for scrapes that break the finish.
• Check for applied stickers or a name tag and whether they suit the brown-and-copper look.

Who the Factory New quality suits

• Collectors who want the copper coat and engraving in their cleanest form.
• Sticker crafters who need an even base for warm metallic stickers.
• The choice for anyone who wants this finish without compromise.