Out of stock
Souvenir MAG-7 | Copper Coated (Factory New)
Rating 4.89 / 18 votes

7.61 $

Souvenir MAG-7 | Copper Coated (Factory New)

Weapon
MAG-7
Collection
The Anubis Collection
Other category
Regular

Offers 0

No offers available

Similar skins

Show allAll

Skin overview

MAG-7 | Copper Coated is a Mil-Spec Grade shotgun skin that looks as if the gun was held under a stream of liquid copper. A dark brown body with an etched panel pattern carries copper tones in its grooves, set against a smooth dark foregrip and a steel-grey magazine. In Factory New the copper layer is even and the fine engraved lines stay crisp across the whole receiver.

Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Appearance in Factory New

The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel.

The copper coat is uniform and the engraved panels keep sharp, clean lines. The foregrip and magazine show an unbroken sheen with no scuffs. In game the receiver reads as a deep, warm brown with clear detailing. Every part of the weapon looks fresh.

Factory New quality — float range 0–0.07

The float of Souvenir MAG-7 | Copper Coated ranges from 0 to 1; the Factory New quality covers 0–0.07 — 7% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Where the skin comes from: collection and case

The skin’s collection is The Anubis Collection with 19 skins in total.

It drops from:

Price by quality

Taking Factory New as the baseline:

Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.

Among 6 skins of the MAG-7 in the Mil-Spec Grade grade and this quality, this skin is the most affordable.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Stickers and crafts

Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.

What to check before buying

  • Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
  • Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
  • Inspect the foregrip curve and magazine corners for scrapes that break the finish.
  • Check for applied stickers or a name tag and whether they suit the brown-and-copper look.

Who the Factory New quality suits

  • Collectors who want the copper coat and engraving in their cleanest form.
  • Sticker crafters who need an even base for warm metallic stickers.
  • The choice for anyone who wants this finish without compromise.
Sell