Souvenir MAG-7 | Copper Coated (Battle-Scarred)

Skin overview

MAG-7 | Copper Coated pairs a coppery etched receiver with dark and steel-grey parts. In Battle-Scarred much of the copper is worn through on edges and raised areas, leaving a patchy, scraped metal look that fits the accidental-coating story. It is the most rugged way to own this finish.

Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

How the skin looks in Battle-Scarred

The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel.

Large areas of the copper coat are worn off on the receiver, muzzle, foregrip and magazine edges. The etched pattern is broken up by scrapes and is hard to follow in places. In game the gun reads as rough, mottled metal with remaining copper spots. The deepest recesses on the receiver sides are the last places with clean colour.

Battle-Scarred quality — float range 0.45–1

The whole float range of Souvenir MAG-7 | Copper Coated is 0–1; Battle-Scarred takes the 0.45–1 segment (55% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

The skin’s collection is The Anubis Collection with 19 skins in total.

It drops from:

• Anubis Collection Package (on sale since Apr 24, 2023)
• Austin 2025 Anubis Souvenir Highlight Package
• Austin 2025 Anubis Souvenir Package
• Copenhagen 2024 Anubis Souvenir Package
• Paris 2023 Anubis Souvenir Package
• Shanghai 2024 Anubis Souvenir Package

What it costs in each quality

Taking Battle-Scarred as the baseline:

• Factory New — 11× dearer
• Minimal Wear — 3× dearer
• Field-Tested — 40% dearer
• Well-Worn — 3% dearer

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 3 skins of the MAG-7 in the Mil-Spec Grade grade and this quality, this skin is the most affordable.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Stickers and crafts

Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.

What to look at before you buy

• Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
• Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
• Inspect the foregrip curve and magazine corners for scrapes that break the finish.
• Check for applied stickers or a name tag and whether they suit the brown-and-copper look.

Who should buy Battle-Scarred

• Players who enjoy rough, scraped metal looks.
• The cheapest way to try the finish before deciding on a cleaner grade.
• For those who value character over clean lines.