1.97 $
Offers 1
Similar skins
Show allAll
Skin overview
This is the copper-flow MAG-7: a warm brown receiver with recessed geometric panels and cool steel parts around it. Minimal Wear keeps the etched pattern and the copper sheen practically intact, with only slight marks on the sharpest edges. It gives nearly the same look as the cleanest grade and is the sensible choice if you want a fresh copy without chasing the top float.
Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.
Gunsmith: several techniques combined on one item; some parts rub off, others only dull.
How the skin looks in Minimal Wear
The receiver and upper body are covered in a dark brown, copper-tinted coat with an etched pattern of rectangular panels and fine geometric lines, the copper tone collecting in the recesses. The curved foregrip is smooth dark grey metal with a soft sheen, while the barrel shroud and muzzle stay dark steel.
Small light marks may appear on the muzzle tip and the sharpest edges of the receiver. The etched pattern and copper tone remain fully intact. At normal viewing distance it is hard to tell apart from Factory New. The foregrip, magazine and side panels stay clean.
Minimal Wear wear: float 0.07–0.15
The float of Souvenir MAG-7 | Copper Coated ranges from 0 to 1; the Minimal Wear quality covers 0.07–0.15 — 8% of this skin’s scale. The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.
Where the skin comes from: collection and case
The skin’s collection is The Anubis Collection with 19 skins in total.
It drops from:
Price by quality
Compared with the Minimal Wear quality, the others go like this:
- Factory New — 3.3× dearer
- Field-Tested — 2.3× cheaper
- Well-Worn — 2.9× cheaper
- Battle-Scarred — 3× cheaper
Based on the cheapest SkinOut.gg listing of each quality, otherwise on the market reference.
Among 3 skins of the MAG-7 in the Mil-Spec Grade grade and this quality, this skin is the most affordable.
Souvenir version
This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.
Which stickers suit it
Gold, bronze, brown and warm orange stickers blend naturally with the copper tone. Placing them on the flat side panels of the receiver keeps the etched pattern readable, while a single dark or holo accent works well against the steel magazine.
What to check before buying
- Check where the float sits within the wear range, since the copper layer thins noticeably between the low and high end of each grade.
- Look at the top edge of the receiver and the muzzle first, as these show wear earliest.
- Inspect the foregrip curve and magazine corners for scrapes that break the finish.
- Check for applied stickers or a name tag and whether they suit the brown-and-copper look.
Who the Minimal Wear quality suits
- Players who want a clean-looking MAG-7 without paying for the top grade.
- Crafters for whom tiny edge marks do not matter.
- Nearly the full look at a more reasonable grade.
