Souvenir AK-47 | Orbit Mk01 (Factory New)

Skin overview

AK-47 | Orbit Mk01 is a hand-painted red and black finish with a technical, sci-fi look. Dark panels sit over a deep red base, and the magazine carries a row of bright red segments that read like lit indicators. In Factory New the red stays saturated and the black panels have crisp edges with no scuffs.

Item type: rifle. The weapon is available only on the Terrorist side. Restricted sits in the middle of the rarity scale: noticeably rarer than Mil-Spec, yet not truly rare.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Other qualities of this skin: Minimal Wear, Field-Tested, Well-Worn and Battle-Scarred. The same quality also exists as the StatTrak™ version.

How the skin looks in Factory New

The receiver is painted deep red with a dark graphite dust cover and black panels with small technical markings along its side. The handguard and gas tube combine black and grey sections with red accents, while the barrel and front sight stay dark.

The finish is complete on every part, with no visible marks on the magazine, receiver or stock. The red is at its richest and the glowing segments on the magazine stay sharp. In game the rifle looks exactly like the clean preview. Differences inside this grade are hard to spot without close inspection.

Factory New wear: float 0–0.07

The float of Souvenir AK-47 | Orbit Mk01 ranges from 0 to 0.55; the Factory New quality covers 0–0.07 — 13% of this skin’s scale. Within the range, copies with a lower float look cleaner and are valued higher.

Where the skin comes from: collection and case

Souvenir AK-47 | Orbit Mk01 belongs to The Operation Hydra Collection, which holds 17 skins.

It drops from Operation Hydra Case.

Price by quality

By price this skin is 2nd of 8 skins Restricted AK-47 in this quality (the first being the dearest).

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Which stickers suit it

Red, black, silver and holo stickers in a red tone fit the scheme best and keep the technical look intact. Placing them on the dark dust cover or the black receiver panels gives good contrast without hiding the red. Bright greens or blues will clash with the palette unless a deliberate contrast is the goal.

What to look at before you buy

• Check the float position within the wear range, since the magazine segments show the difference first.
• Look at the magazine ribs and the edges of the dust cover, as these are the first parts to lose paint.
• Note any applied stickers or name tag, since they change how the red receiver reads.
• Decide whether you want a StatTrak™ or Souvenir version, as both exist for this skin.

Who should buy Factory New

• Collectors who want the red at full saturation and a flawless magazine.
• Sticker crafters who need a clean base for a red and black craft.
• The choice for buyers who want this design in its best condition.