Souvenir Desert Eagle | Serpent Strike (Factory New)

Skin overview

Desert Eagle | Serpent Strike covers the pistol in an orange and red snakeskin pattern, with a red zigzag line along the slide and a coiled snake on the grip panel. In Factory New the scales stay sharp and the warm shift from orange to deep red reads cleanly on every part. This is the grade where the snake on the grip looks exactly as drawn.

Item type: pistol. Restricted sits in the middle of the rarity scale: noticeably rarer than Mil-Spec, yet not truly rare.

Spray-Paint: paint sprayed over the metal; scratches and scuffs appear early but look natural.

Other qualities of this skin: Well-Worn and Battle-Scarred. The same quality also exists as the StatTrak™ version.

Appearance in Factory New

The slide is covered in orange and rust-red snakeskin scales with darker mottled patches, and a thin bright red zigzag line runs along its side toward the muzzle. The frame, the rail under the barrel and the hammer stay dark gunmetal grey, which frames the warm colours.

The finish is clean on every part: the scales on the slide, the zigzag line and the serpent on the grip have no visible marks. The orange areas stay bright and the dark patches keep crisp borders. In game the slide reads as a saturated warm block with fine texture visible up close. Edges of the muzzle and slide are as sharp as on the preview image.

Factory New wear: float 0–0.07

The whole float range of Souvenir Desert Eagle | Serpent Strike is 0–0.57; Factory New takes the 0–0.07 segment (12% of the scale). Within the range, copies with a lower float look cleaner and are valued higher.

Origin of the skin

Souvenir Desert Eagle | Serpent Strike belongs to The Fever Collection, which holds 17 skins.

It drops from Fever Case.

What it costs in each quality

Taking Factory New as the baseline:

• Minimal Wear — 1.6× cheaper
• Field-Tested — 1.6× cheaper

The comparison uses our cheapest listing of each quality; where there is none, the market reference.

Among 12 skins of the Desert Eagle in the Restricted grade and this quality, this skin is the most affordable.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Which stickers suit it

Red, orange, gold and black stickers sit well on the warm scales without breaking the colour scheme. Placing them on the side of the slide away from the zigzag line keeps the snake motif readable. Cold blues and greens contrast sharply and suit only deliberately bold crafts.

What to look at before you buy

• Check where the float sits within the wear grade, since a low value in Field-Tested or Well-Worn noticeably reduces metal on the slide edges.
• Inspect the muzzle end and the top of the slide, as these lose paint first on this finish.
• Look at the serpent on the grip panel to see how much of its outline is still intact.
• Check stickers and name tag, since they change how the slide reads and may not suit every buyer.

Who the Factory New quality suits

• Collectors who want the snakeskin and grip serpent exactly as drawn.
• Sticker crafters who need a clean base for warm-toned combinations.
• Conclusion: the choice for buyers who want the finish with no compromises.