Souvenir MAG-7 | MAGnitude (Factory New)

Skin overview

MAG-7 | MAGnitude is a Gunsmith finish for the CT shotgun, built around red concentric rings that spread from the round bolt above the trigger across a grey metal body. In Factory New the red lines are crisp and evenly saturated, and the engraved panels on the receiver stay sharp. This is the grade where the shockwave idea reads most clearly from end to end.

Item type: shotgun. The weapon is available only on the Counter-Terrorist side. Mil-Spec Grade is the lowest rarity found in cases and the most common one among them.

Gunsmith: several techniques combined on one item; some parts rub off, others only dull.

Other qualities of this skin: Minimal Wear, Field-Tested, Well-Worn and Battle-Scarred. The same quality also exists as the StatTrak™ version.

Appearance in Factory New

The base of the finish is a grey, slightly textured gunmetal that covers the receiver, the front foregrip, the pistol grip and the magazine. On the side of the receiver, concentric rings radiate from the round bolt above the trigger, drawn in dark grey with red bands that run forward along the body and up to the top rail.

The red rings and stripes are fully intact on every part of the weapon. The edges of the receiver, the top rail and the barrel shroud show no marks. In game the contrast between red and grey is at its strongest. Engravings and the emblem on the foregrip look sharp.

Factory New wear: float 0–0.07

The whole float range of Souvenir MAG-7 | MAGnitude is 0–1; Factory New takes the 0–0.07 segment (7% of the scale). The lower the float within the range, the cleaner the surface looks and the higher a copy is usually priced.

Origin of the skin

Souvenir MAG-7 | MAGnitude belongs to The Genesis Collection, which holds 17 skins.

The source is Sealed Genesis Terminal.

What it costs in each quality

Among 4 skins of the MAG-7 in the Mil-Spec Grade grade and this quality, this skin ranks 3rd by price, counting from the dearest.

Souvenir version

This is the Souvenir version: such copies dropped to tournament viewers in souvenir packages; the team stickers and signatures on them cannot be removed or chosen. Souvenir items never carry StatTrak™. There is also the regular version without tournament stickers.

Which stickers suit it

Red, black and silver stickers match the shockwave motif and the grey metal. Placements on the side of the receiver should avoid covering the rings around the bolt, so the grip area or the front of the body works better.

What to check before buying

• Check where the float sits within the wear grade, since the red on the barrel shroud and top rail is the first to go.
• Look at the rings around the bolt on the receiver, as they carry the main idea of the skin.
• Inspect the edges of the receiver and the front of the foregrip on worn copies.
• Check any applied stickers and name tag to make sure they fit the red and grey scheme.

Who the Factory New quality suits

• Collectors who want the ring pattern with full colour and sharp engravings.
• Sticker crafters who need a clean base for red and silver combinations.
• The pick for anyone who wants this finish as clean as it gets.